Please wait a minute...
Advanced Search
数据分析与知识发现  2018, Vol. 2 Issue (2): 20-28     https://doi.org/10.11925/infotech.2096-3467.2017.0906
  专题 本期目录 | 过刊浏览 | 高级检索 |
面向动态知识管理及重用的概念设计过程知识语义建模技术研究*
傅柱1,2(), 姜宇星2, 王曰芬2,3
1(河海大学企业管理学院 常州 213022)
2(南京理工大学经济管理学院 南京 210094)
3(江苏省社会公共安全科技协同创新中心 南京 210094)
Modeling Conceptual Design Process for Dynamic Knowledge Management and Reuse
Fu Zhu1,2(), Jiang Yuxing2, Wang Yuefen2,3
1(School of Enterprise Management, Hohai University, Changzhou 213022, China)
2(School of Economics and Management, Nanjing University of Science and Technology, Nanjing 210094, China)
3(Jiangsu Collaborative Innovation Center of Social Safety Science and Technology, Nanjing 210094, China)
全文: PDF (705 KB)   HTML ( 3
输出: BibTeX | EndNote (RIS)      
摘要 

目的】为实现概念设计过程中动态设计知识的有效管理和重用, 研究概念设计过程知识的语义建模技术。【方法】从知识管理和知识重用两个角度分析设计过程知识语义建模需求, 集成模板技术和组件技术, 借助语义化方法构建设计过程知识语义建模技术体系; 以技术体系为指导和支撑, 实现设计过程中设计流程知识的语义建模, 并进一步对设计流和知识流进行集成建模。【结果】提出可配置流程模板和可配置知识组件相结合的双层模块化封装技术, 基于该技术构建设计过程知识语义建模技术体系; 利用可配置流程模板实现设计流程知识进行语义建模, 利用可配置知识组件实现设计流和知识流进行集成建模。【局限】未进行实例分析和验证。【结论】所构建的设计过程知识语义建模体系能够对概念设计过程中的动态设计知识进行有效建模。

服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
傅柱
姜宇星
王曰芬
关键词 概念设计知识管理设计过程知识语义建模流程模板知识组件    
Abstract

[Objective] This study explores the semantic modeling technology for conceptual design process, aiming to effectively manage and reuse dynamic knowledge. [Methods] First, we analyzed the demands of semantic modeling from the perspectives of knowledge management and reuse. Then, we integrated the template and component technology to build semantic modeling system. Finally, we semantically modeled the design flow, which was integrated to the knowledge flow model. [Results] We proposed a two-layer modular encapsulation technology combining configurable flow template and knowledge component, which was used to construct the semantic modeling systems for the design and knowledge flow. [Limitations] We need to add case studies to our research. [Conclusions] The constructed semantic modeling system could effectively model the dynamic design knowledge in the conceptual design process.

Key wordsConceptual Design    Knowledge Management    Design Process Knowledge    Semantic Modeling    Flow Template    Knowledge Component
收稿日期: 2017-09-07      出版日期: 2018-03-07
ZTFLH:  G350  
基金资助:*本文系装备技术基础项目“面向特定领域军事技术本体库构建研究”(项目编号: YXNLG20171QB06)和江苏省社会公共安全优势学科项目的研究成果之一
引用本文:   
傅柱, 姜宇星, 王曰芬. 面向动态知识管理及重用的概念设计过程知识语义建模技术研究*[J]. 数据分析与知识发现, 2018, 2(2): 20-28.
Fu Zhu,Jiang Yuxing,Wang Yuefen. Modeling Conceptual Design Process for Dynamic Knowledge Management and Reuse. Data Analysis and Knowledge Discovery, 2018, 2(2): 20-28.
链接本文:  
https://manu44.magtech.com.cn/Jwk_infotech_wk3/CN/10.11925/infotech.2096-3467.2017.0906      或      https://manu44.magtech.com.cn/Jwk_infotech_wk3/CN/Y2018/V2/I2/20
  基于双层模块化封装技术的设计过程知识语义建模技术体系
  可配置流程模板的层次及关系
  可配置流程模板的控制流和数据流节点
  可配置知识组件的层次及关系
  可配置知识组件的具体结构
  知识组件间的依赖关系
[1] 石鑫, 同淑荣, 马飞. 面向重用的产品设计过程知识分类及表示研究[J]. 机床与液压, 2010, 38(17): 21-24.
doi: 10.3969/j.issn.1001-3881.2010.17.007
[1] (Shi Xin, Tong Shurong, Ma Fei.An Reuse-Oriented Knowledge Classification and Representation for Product Design Process[J]. Machine Tool & Hydraulics, 2010, 38(17): 21-24.)
doi: 10.3969/j.issn.1001-3881.2010.17.007
[2] 周峰. 产品设计过程的建模、仿真及优化研究[D]. 大连: 大连理工大学, 2008.
[2] (Zhou Feng.Study on Modeling, Simulation and Optimization of the Product Designing Process [D]. Dalian: Dalian University of Technology, 2008.)
[3] 张善辉. 机械产品设计知识管理系统的研究[D]. 济南: 山东大学, 2008.
[3] (Zhang Shanhui.Research on Design Knowledge Management System for Mechanical Product[D]. Ji’nan: Shandong University, 2008.)
[4] 温和林. 面向产品设计过程的知识流程建模与知识重用研究[D]. 上海: 上海交通大学, 2011.
[4] (Wen Helin.Research on Product Process Oriented Knowledge Process Modeling and Knowledge Reuse [D]. Shanghai: Shanghai Jiaotong University, 2011. )
[5] 李添益. 机械产品设计过程的路径决策及其模块化规划研究[D]. 杭州: 浙江大学, 2011.
[5] (Li Tianyi.Research on Design Route Generation and Modularization Planning in Mechanical Product Design [D]. Hangzhou: Zhejiang University, 2011.)
[6] 李慧清. 机械产品设计知识建模及应用[D]. 杭州: 浙江大学, 2011.
[6] (Li Huiqing.Research on the Modeling and Application of Mechanical Product Design Knowledge[D]. Hangzhou: Zhejiang University, 2011.)
[7] 郭俊. 产品设计过程中的任务建模及知识获取机制研究[D]. 上海: 上海交通大学, 2012.
[7] (Guo Jun.Research on Task Modeling and Knowledge Acquisition in Product Design Process[D]. Shanghai: Shanghai Jiaotong University, 2012.)
[8] 童立新. 基于工作流技术的知识推理过程建模及推理引擎的开发[D]. 上海: 上海交通大学, 2007.
[8] (Tong Lixin.Research on Reasoning Process Modeling and Knowledge Engine Development Based on Workflow Technology[D]. Shanghai: Shanghai Jiaotong University, 2007.)
[9] 李景洲. 基于工作流建模技术的信息系统开发方法[D]. 北京: 中国科学院计算技术研究所, 2001.
[9] (Li Jingzhou.A New Development Method for Information Systems Based on Workflow Modeling Technique [D]. Beijing: Institute of Computing Technology Academia Sinica, 2001.)
[10] 陈浩, 刘念, 胡艳军, 等. 基于工作流的知识建模研究[J].制造业自动化, 2005, 27(5): 8-12.
doi: 10.3969/j.issn.1009-0134.2005.05.004
[10] (Chen Hao, Liu Nian, Hu Yanjun, et al.Research of Knowledge Management Modeling Technology Based on Workflow[J]. Manufacturing Automation, 2005, 27(5): 8-12.)
doi: 10.3969/j.issn.1009-0134.2005.05.004
[11] 张晓刚, 李明树. 基于工作流的知识流建模与控制[J]. 软件学报, 2005, 16(2): 184-193.
[11] (Zhang Xiaogang, Li Mingshu.Workflow-Based Knowledge Flow Modeling and Control[J]. Journal of Software, 2005, 16(2): 184-193.)
[12] Han L, Yao Z, Liu S, et al.Application and Research of Ontology in Workflow Knowledge Meta-model[C]// Proceedings of the 11th International Conference on Computer Supported Cooperative Work in Design. 2007: 675-680.
[13] 阎嫕. 基于工作流知识的建模研究与实现[D]. 济南: 山东师范大学, 2008.
[13] (Yan Yi.Modeling Research and Implement Based on Workflow Knowledge [D]. Ji’nan: Shandong Normal University, 2008.)
[14] Zhang C, Xi J.An Integration Model of Workflow and Knowledge Flow[C]//Proceedings of the 2009 International Conference on Management and Service Science. IEEE, 2009: 1-4.
[15] Han L, Li M.Application and Research on Ontology in E-Government Workflow Model[C]//Proceedings of the 2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering, 2010: 474-477.
[16] 刘巍巍, 邵文达, 刘晓冰. 面向机械产品创新与快速设计的知识建模方法研究[J]. 组合机床与自动化加工技术, 2014(5): 27-30.
doi: 10.13462/j.cnki.mmtamt.2014.05.007
[16] (Liu Weiwei, Shao Wenda, Liu Xiaobing.Research on the Knowledge Modeling Method of Innovative and Rapid Design in Mechanical Products[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2014(5): 27-30.)
doi: 10.13462/j.cnki.mmtamt.2014.05.007
[17] Sadiq S, Sadiq W, Orlowska M.Pockets of Flexibility in Workflow Specification[C]// Proceedings of the 2001 International Conference on Conceptual Modeling: Conceptual Modeling. 2001: 513-526.
[18] Elst L V, Aschoff F R, Bernardi A, et al.Weakly-Structured Workflows for Knowledge-Intensive Tasks: An Experimental Evaluation[C]//Proceedings of the 12th International Workshops on Enabling Technologies: Infrastructure for Collaborative Enterprises. IEEE, 2003: 340-345.
[19] Adams M, Ter Hofstede A H M, Edmond D, et al. Worklets: A Service-Oriented Implementation of Dynamic Flexibility in Workflow s[A]// On the Move to Meaningful Internet Systems 2006: CoopIS, DOA, GADA, and ODBASE[M]. Springer Berlin Heidelberg, 2006: 291-308.
[20] 李竞杰, 王维平, 杨峰. 柔性工作流理论方法综述[J]. 计算机集成制造系统, 2010, 16(8): 1569-1577.
doi: 10.3724/SP.J.1238.2010.00585
[20] (Li Jingjie, Wang Weiping, Yang Feng.Review on Approaches of Flexible Workflow[J]. Computer Integrated Manufacturing Systems, 2010, 16(8): 1569-1577.)
doi: 10.3724/SP.J.1238.2010.00585
[21] 李申, 邵晓东, 常建涛. 面向产品设计过程的动态工作流建模方法[J]. 计算机集成制造系统, 2012, 18(6): 1136-1144.
[21] (Li Shen, Shao Xiaodong, Chang Jiantao.Dynamic Workflow Modeling Oriented to Product Design Process[J]. Computer Integrated Manufacturing Systems, 2012, 18(6): 1136-1144.)
[22] 郝佳, 阎艳, 王国新, 等. 面向用户的非几何设计知识组织方法[J]. 计算机集成制造系统, 2014, 20(6): 1300-1307.
doi: 10.13196/j.cims.2014.06.haojia.1300.8.2014064
[22] (Hao Jia, Yan Yan, Wang Guoxin, et al.User-Oriented Non- Geometry Design Knowledge Organization Method[J]. Computer Integrated Manufacturing Systems, 2014, 20(6): 1300-1307.)
doi: 10.13196/j.cims.2014.06.haojia.1300.8.2014064
[1] 李明, 李莹, 周庆, 王君. 基于TF-PIDF的网络问答社区中的知识供需研究 *[J]. 数据分析与知识发现, 2021, 5(2): 106-115.
[2] 傅柱,王曰芬,丁绪辉. 面向知识重用的设计过程知识语义表示研究*[J]. 数据分析与知识发现, 2019, 3(6): 21-29.
[3] 丁晟春, 刘梦露, 傅柱. 概念设计中基于知识流的多维设计知识统一建模技术研究*[J]. 数据分析与知识发现, 2018, 2(2): 11-19.
[4] 王曰芬, 傅柱, 吴鹏. 概念设计中基于知识流的语义化知识管理技术框架研究*[J]. 数据分析与知识发现, 2018, 2(2): 2-10.
[5] 羊柳, 傅柱, 王曰芬. 概念设计中的设计过程知识获取研究*[J]. 数据分析与知识发现, 2018, 2(2): 29-36.
[6] 颜端武,魏雪艳,赵飞. 基于知识组件的产品设计知识重用方法研究*[J]. 现代图书情报技术, 2016, 32(5): 72-79.
[7] 张晓林. 机构知识库的发展趋势与挑战[J]. 现代图书情报技术, 2014, 30(2): 1-7.
[8] 宋文, 黄金霞, 刘毅, 汤怡洁. 面向知识发现的SKE关键技术及服务[J]. 现代图书情报技术, 2012, 28(7): 13-18.
[9] 张星, 蔡淑琴, 夏火松, 侯德林. 基于社会网络的企业知识管理系统框架研究[J]. 现代图书情报技术, 2011, 27(5): 36-41.
[10] 周宁,王淼. 基于MUDs的面向特定领域的知识管理模型研究[J]. 现代图书情报技术, 2008, 24(5): 33-38.
[11] 梁勇,章成志,王昊. 基于CSSCI的期刊知识地图的构建[J]. 现代图书情报技术, 2008, 24(2): 59-63.
[12] 王曰芬,王海丹. 基于知识管理的人际情报网络构建的方法与流程研究*[J]. 现代图书情报技术, 2007, 2(9): 12-17.
[13] 恢光平,邬尚君,浦晓斌. 基于知识管理的人际情报网络构建的案例研究*[J]. 现代图书情报技术, 2007, 2(9): 23-27.
[14] 丁晟春,浦晓斌,王雪芬. 基于知识管理的人际情报网络实验系统的设计与实现*[J]. 现代图书情报技术, 2007, 2(9): 18-22.
[15] 黄波,张怡华,程绍敏,杨槐. 重点学科导航人机结合信息筛选方法*[J]. 现代图书情报技术, 2007, 2(8): 30-33.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015 《数据分析与知识发现》编辑部
地址:北京市海淀区中关村北四环西路33号 邮编:100190
电话/传真:(010)82626611-6626,82624938
E-mail:jishu@mail.las.ac.cn